Boxes.py

style of the fingers

space at the start and end in multiple of normal spaces

height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!

space below holes of FingerHoleEdge (multiples of thickness)

extra material to grind away burn marks (multiples of thickness)

width of the fingers (multiples of thickness)

extra space to allow finger move in and out (multiples of thickness)

space between fingers (multiples of thickness)

width of finger holes (multiples of thickness)

space below holes of FingerHoleEdge (multiples of thickness)

"spring", "stud" or "none"

horizontal width of the hook

horizontal space to the hook

height of the horizontal bar of the hook

height of the hook top to bottom

vertical spacing of slots middle to middle (in mm)

space below holes of FingerHoleEdge (multiples of thickness)

space surrounding connectors (multiples of thickness)

"stud" or "none"

horizontal width of the hook

space below holes of FingerHoleEdge (multiples of thickness)

angle of the cut (0 for horizontal)

"stud", "hook" or "none"

horizontal width of the hook in mm

distance of the cleats in mm (for bottom hook)

space below holes of FingerHoleEdge (multiples of thickness)

Type of wall system to attach to

inner height in mm

depth of slots from the front

depth behind the lots

width of slots

overall width for the tools

radius of the slots at the front

number of tools/slots

amount of hooks / braces

thickness of the material (in mm) 🛈

format of resulting file 🛈

width of tabs holding the parts in place (in mm)(not supported everywhere) 🛈

Add a QR Code with link or command line to the generated output

print surrounding boxes for some structures 🛈

label the parts (where available)

print reference rectangle with given length (in mm)(zero to disable) 🛈

style for inner corners 🛈

burn correction (in mm)(bigger values for tighter fit) 🛈