Boxes.py

style of the fingers

space at the start and end in multiple of normal spaces

height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!

space below holes of FingerHoleEdge (multiples of thickness)

extra material to grind away burn marks (multiples of thickness)

width of the fingers (multiples of thickness)

extra space to allow finger move in and out (multiples of thickness)

space between fingers (multiples of thickness)

width of finger holes (multiples of thickness)

how much should fingers widen (-80 to 80)

how far the dove tails stick out of/into the edge (multiples of thickness)

radius used on all four corners (multiples of thickness)

from one middle of a dove tail to another (multiples of thickness)

inner width in mm

inner depth in mm

height of the filter along the flow direction (in mm)

rim around the filter holing it in place (in mm)

diameter of the fans (in mm)

Filters on both sides or only one

Split frame pieces into four thin rectangles to save material

number of fans on the left side (-1 for maximal number)

number of fans on the right side (-1 for maximal number)

number of fans on the top side (-1 for maximal number)

number of fans on the bottom side (-1 for maximal number)

diameter of the holes for screwing in the fans (in mm)

thickness of the material (in mm) 🛈

format of resulting file 🛈

width of tabs holding the parts in place (in mm)(not supported everywhere) 🛈

Add a QR Code with link or command line to the generated output

print surrounding boxes for some structures 🛈

label the parts (where available)

print reference rectangle with given length (in mm)(zero to disable) 🛈

style for inner corners 🛈

burn correction (in mm)(bigger values for tighter fit) 🛈